1. Product Introduction
The dry mortar production line is a fully integrated automatic manufacturing system specially designed for dry powder building material production. It covers automatic raw material feeding, precise gravimetric batching, high-efficiency homogeneous mixing, deaeration, material storage and intelligent packaging. Adopting modular structure and PLC centralized control system, the whole line realizes continuous, stable and standardized mass production. It effectively solves the common problems of traditional manual mixing, such as inaccurate proportioning, uneven mixing, heavy dust pollution, low output and unstable product quality. Widely used in construction materials, chemical powder and environmental protection industries, it is essential professional equipment for modern dry mortar factories.
2. Core Advantages
- High Mixing Uniformity & Stable Quality Equipped with professional three-dimensional turbulence mixing system, the equipment realizes multi-directional convection, shearing and diffusion of materials. The mixing uniformity reaches above 99.5%, ensuring no material segregation, no dead corner accumulation and even dispersion of micro additives. Every batch of finished mortar maintains consistent strength, adhesion and stability.
- Fully Automatic Operation & High Efficiency The whole production process from batching, mixing, discharging to packaging is automatically controlled by PLC. It supports one-key start-stop, formula memory and parameter storage. Only 2–3 workers are required for full-line operation, greatly reducing labor cost and supporting 24-hour continuous mass production.
- Strong Versatility & Wide Compatibility Flexible adjustment of mixing speed, mixing time and batching ratio enables the line to adapt to thousands of powder materials, including ordinary construction mortar, special functional mortar, tile adhesive, wall putty, thermal insulation mortar, chemical powder and industrial additives. One line meets diversified production needs.
- Eco-friendly & Energy-saving Full sealed structure matched with high-efficiency dust removal equipment effectively controls dust leakage and improves workshop environment. Compared with traditional mixing equipment, it reduces overall energy consumption by over 20%, with low vibration and low noise, fully meeting industrial environmental standards.
- Durable Structure & Low Maintenance Key components such as mixing blades and cylinder liners adopt high-strength wear-resistant and anti-corrosion materials. Modular split design facilitates daily disassembly, cleaning and maintenance, effectively avoiding cross-batch contamination and adapting to long-term continuous operation.
- Customized Layout & Strong Adaptability Customizable from small laboratory lines, medium pilot lines to large industrial production lines. Professional production schemes can be designed according to customer site size, investment budget and output requirements.
3. Technical Specifications
| Parameter Items |
Technical Data |
| Equipment Model |
Small / Medium / Large Customized Type |
| Production Capacity |
3–120t/h (Optional) |
| Mixing Volume |
0.1L–12000L |
| Mixing Uniformity |
≥99.5% |
| Batching Accuracy |
Main Material ±0.2%, Additive ±0.1% |
| Mixing Speed |
25–80r/min (Frequency Adjustable) |
| Working Mode |
Full-automatic Continuous Production |
| Control System |
PLC Intelligent Touch Control, Storable Parameters |
| Operating Workers |
2–3 Workers per Shift |
| Applicable Materials |
Dry mortar, tile adhesive, putty powder, thermal insulation mortar, chemical powder, industrial additives |
| Optional Protection |
Dustproof, Explosion-proof, Overload Protection |
4. Notes on Use
- Inspect all connecting parts, sealing condition, dust removal system, circuit and oil circuit before startup. Clean internal sundries strictly and prohibit long-time no-load high-speed operation.
- Feed raw materials strictly according to production formulas. Hard metal objects and large impurities are forbidden to enter the mixing chamber to avoid equipment damage.
- Do not open the cover or touch rotating components during operation. Parameter modification is prohibited during running status. Stop the machine immediately for inspection in case of abnormal noise, jamming or material leakage.
- Clean the mixing cavity and mixing components thoroughly before formula replacement to prevent cross-contamination between batches. Clean residual materials and dust after daily production.
- Place the equipment on flat, dry and ventilated hardened ground with reliable grounding protection. Enable explosion-proof mode when producing flammable materials.
- Operators must receive professional training and be familiar with operation procedures and emergency handling. Unauthorized operation and arbitrary equipment modification are forbidden.
5. Application Scenarios
- Construction & Building Materials Industry Mass production of masonry mortar, plastering mortar, waterproof mortar, thermal insulation mortar, tile adhesive, joint filler and interior & exterior wall putty powder.
- New Material Industry Mixing and processing of refractory powder, ceramic powder, magnetic materials and environmental catalytic powder.
- Chemical & Additive Industry Precise batching and uniform mixing of chemical powder, pigment powder, fertilizer powder and industrial additives.
- Solid Waste Recycling Homogeneous mixing and modification of fly ash and industrial residue for resource reuse.
- Laboratory & Research Small-batch formula research, sample testing and pilot production for universities and enterprises.
- Industrial Mass Production Standardized continuous production for medium and small building material factories and powder processing plants.
6. FAQ
Q1: What products can the dry mortar production line make?
A1: This line can produce various dry building materials and industrial powder products, including masonry mortar, plastering mortar, waterproof mortar, thermal insulation mortar, tile adhesive, putty powder, grout, chemical powder and solid waste recycled powder, covering multiple industrial fields.
Q2: Can the production capacity be customized?
A2: Yes. We provide full-range customization services. The capacity ranges from 3t/h to 120t/h. We can design small experimental lines, medium pilot lines and large industrial continuous production lines according to customers’ site conditions, budgets and output demands.
Q3: Is the mixing quality stable?
A3: Very stable. Adopting advanced 3D turbulence mixing technology and high-precision batching system, the equipment achieves mixing uniformity above 99.5%, ensuring consistent product quality for every batch and meeting high-standard industrial production requirements.
Q4: Is the machine easy to operate? How many workers are needed?
A4: Equipped with intelligent PLC touch control system, the operation interface is simple and intuitive with one-key start-stop and automatic formula operation. Only 2–3 workers are needed per shift, saving plenty of labor costs.
Q5: Will different materials cause cross-contamination?
A5: No cross-contamination. The equipment is equipped with full-range wall scrapers without dead material accumulation. The detachable structure supports thorough cleaning, allowing fast formula switching and ensuring product purity.
Q6: What after-sales services do you provide?
A6: We provide one-stop full-cycle services including equipment customization, factory debugging, on-site installation and commissioning, operator training, long-term remote after-sales support and spare parts supply to solve all production and maintenance problems for customers.
